Searching...
Airport Kern Redd Rock
6625 Montana Ave
(915) 772 9666
2800 N.Stanton St
(915) 532 9666
5650 N. Desert Blvd
(915) 585 9666
 
 
 
 
 
 
 

Refine By

Availability

Brands

+ more brands

Consumer Reviews

Size

+ more sizes
VisaMasterCardAmerican ExpressDiscoverPayPal
 
> Bicycling > Wheels

Wheels

165 Results
Per Page 30 60
1 2 3 4 5 Next >>
DT Swiss Champion 14g Silver Spokes
$1.50 - $2.10

- Straight gauge 2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads - Includes 12mm 14g silver brass nipples - 222g @ 32h/265mm - Box of 100 [more]

Stan's NoTubes Presta Removeable Valve Core
$2.00

Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips. [more]

DT Swiss Champion 14g Black Spokes
$3.20 - $86.00

- Straight gauge 2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads. Black surface treatment resists scratches - Includes 12mm 14g silver brass nipples - 222g @ 32h/265mm - Box of 72 [more]

Ritchey Snap-On Rim Strip
$4.99

• Easily snaps over your rims • Stretchy, tightly woven material provides a close fit and protects from abrasion • Sold as a pair • Available for 26-inch, 27.5-inch, 29-inch, and 700c wheels • Not for tubeless set up [more]

Giant Rim Bands
$5.00

- Strong nylon reinforced PVC for a secure fit - Handles high-pressures; does not rot - 0.5mm thick [more]

Challenge Tires Professional Rim Cement
$5.08

Challenge's Professional Rim Cement is just what you need to get your new set of tubies mounted up and ready to race. This product is only to be used on aluminum rims. [more]

Salsa Skewer Springs - Bag of 10
$6.00

Keep your skewers properly situated with these quality skewer springs from Salsa. [more]

Stan's NoTubes Universal Kit Rim Tape
$6.00

Lay down Stan's Universal Kit Rim Tape before the tubeless conversion of your non-Stan's rims. It makes your rims air tight and ready for tubeless use by covering the spoke holes. [more]

Sunlite Quick Release Skewer (Front, 100mm)
$6.99

• Replacement steel quick release skewers [more]

Sunlite Replacement QR Skewer
$6.99

- Replacement rear skewer - Spacing: 135mm - Material: Steel [more]

Mavic 12 > 9.5mm Rear Axle Adapters
$7.90

On today's MTB frames, there are many diameters and width dropouts standards. Most Mavic wheels can be fitted with specific adapters to match with those frames: 142mm extenders for ITS-4 hubs, 142 mm extenders for TS-2 hubs and QR adapters (delivered with a front quick release) for all of them. -… [more]

Mavic 135 > 142mm Rear Axle Adapters - Crossride
$7.90

On today's MTB frames, there are many dropout diameter and width standards. Most Mavic wheels can be fitted with specific adapters to match your wheelset with your frame. - Converts Mavic Crossride rear hubs with 135mm spacing to fit frames with dropouts spacing of 142mm - One pair of adapters… [more]

Mavic 15mm Front Axle Adapter - Crossmax ST/SX
$7.90

On today's MTB forks, there are multiple front axle standards. Mavic front axle adapters allow you to mix and match without replacing wheels/forks. Most Mavic wheels can be fitted with specific adapters to match your fork end dimensions. - Converts Mavic Crossmax ST/SX front hub to use a 15mm axle… [more]

Origin8 Lockring
$7.99

Origin-8's Track Cog Lock Ring with left-handed threading and 1.29 x 24tpi in a chrome finish completes your basic track cog locking needs. [more]

Wheels Manufacturing Inc. CN-R082 Cone
$9.00

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: Sovos 9mm x 1, front hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 -… [more]

Wheels Manufacturing Inc. CN-R083 Cone
$9.00

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech, Joy U, KK 9mm x 1, front hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 15mm - Threads:… [more]

Bontrager Cross-Country Tubeless Rim Tape
$9.99

- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel [more]

Bontrager Road TLR Tubeless Rim Tape
$9.99

- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel - Width : 17mm [more]

Bontrager Tubeless Valves
$9.99 - $11.99

These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Key features: - To be used exclusively with Bontrager Tubeless Ready (TLR) wheels - Required for Bontrager's Tubeless Ready (TLR) system setup - Removable valve… [more]

Mavic Universal Wheel Magnet
$9.99

- Cyclocomputer wheel magnet - Fits most bicycle spokes - For Tracomp carbon spokes found on Mavic wheels, see Tracomp Spoke Removeable Magnet (each sold separately) [more]

Giant Rim Tape MTB/Trekking 18mm
$10.00

- Strong nylon reinforced material handles high-pressures - Adhesive backed for a secure fit - Does not rot - 0.5mm thick [more]

Kurt Kinetic Trainers Skewer
$12.00

Kurt Kinetic's Skewer is an affordable, steel quick-release that perfectly fits into all Kurt Kinetic trainers. Use it instead of your nice aluminum quick release so it stays in pristine condition. • 130mm width [more]

CycleOps Trainer Skewer
$12.99
Product Rating
 
5.0 stars
 (12 Reviews)

CycleOps' Trainer Skewer ensures your trainer will hold your rear wheel in place. Made of heavy-duty stainless steel, it will provide years of reliable use and keeps your high-end skewers pristine. [more]

Wheels Manufacturing Inc. Axle-13
$13.00

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs - Type: Solid Axle - Threads: 9.5mm x… [more]

Stan's NoTubes Rim Tape
$13.50 - $15.50

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha… [more]

HALO Pawl And Spring Kits
$14.95 - $25.95

- Replacement pawls and springs for DJD Bush Drive rear are for original DJD or DJD-Bush Drive rear hub - Replacement pawls and springs for Spin Doctor 6-Drive are compatible with all 6-Drive hubs - Replacement pawls and springs for Supa Drive are compatible with all Supa Drive hubs - Spin Doctor,… [more]

WTB TCS Rim Tape
$14.95 - $16.95

Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims). [more]

Mavic UST Rounded Valve
$14.99

- UST compliant tubeless valve with removable valve core for easy sealant installation. - Mavic recommends that UST valves must be changed once a year to ensure the sealing of the UST systems. Two versions are available: - Round stem compatible with 2012 and beyond Crossmax SLR, ST and SX and 2013… [more]

Wheels Manufacturing Inc. Axle-33
$14.99

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many BMX hubs - Type: Solid Axle - Threads: 9.5mm x 26tpi -… [more]

165 Results
Per Page 30 60
1 2 3 4 5 Next >>
 

Website Disclaimer Notice

By using this website you are accepting all the terms of this disclaimer notice.  If you do not agree with anything in this notice you should not use this website. While every effort is made to ensure that the content of this website is accurate, the website is provided “as is” and Crazy Cat Cyclery makes no representations or warranties in relation to the accuracy or completeness of the information found on it.  While the content of this site is provided in good faith, we do not warrant that the information will be kept up to date, be true and not misleading, or that this site will always (or ever) be available for use.